Heat Exchangers

Patent Efficient Design – As refrigerants release heat to the pool water, it goes from a gas state to a liquid state inside the heat exchanger. This liquid can build up inside the heat exchanger, taking up valuable space and significantly reducing a heat pumps heating capacity. Toyesi’s patent design addresses this liquid refrigerant build up with a space-saving design with room to spare, to allow for the liquid build-up, without compromising heating capacity or loss of efficiency.

Using in-house patent designed and built heat exchangers, we can offer energy efficiencies that others are envious of.

• Seamless copper-nickel coaxial tube-in-tube design
• Extremely high heat transfer coefficients to deliver optimum performance and efficiency.
• Designed to last and hold up against any titanium heat exchanger for longevity. With units still in operation 20 years on.
• Full metal inner and outer to ensure no plastic component failures or leaking connections. High-pressure rating compared to U-PVC.
• Full metal inner and outer to ensure no plastic component failures or leaking connections.

We do not use the pool heat exchanger industry norm of having titanium in plastic shells. Although they considerably reduce the cost of manufacture of a heat pump, we have found that are prone to premature failure due to excessive pressures, temperatures, heat stress elongation, distortion and the melting of plastic fittings as well as suffering from water turbulent vibration stress crack fracturing causing leaks and failure. Often this is not from the titanium failing, but the PVC outer shell.

Our refrigerant-to-water heat exchangers are made of full-length all-metal titanium tube and tube type heat exchangers that are fully welded or braised and have been produced for many years and are specifically made for refrigeration, air conditioning and marine industry applications with known and predictable lifetime for fresh, chlorinated water or marine saltwater conditions. They have easy to silver-braze connections for refrigerant and water connections.

• Water Circuit in the inner coil and gas in between the inner and outer coils to enhance turbulence to intensify the heat transfer coefficient.
• Spiral corrugated tubes to increase heat transfer area.
• Continuous tubing and fewer welding points increase the reliability even under pressure.
• Anti-freezing and self-cleaning properties.
• Outer insulation for chilling projects.

Titanium heat exchangers work very well in aquaculture, horticulture and any project that has chemically treated water, salty water or low quality water.

Toyesi’s titanium heat exchangers are of the highest quality, however, they do come at a premium. Seeking a lower cost alternative without compromise we identified that the same manufacturer had a very unique mono-block design titanium heat exchanger.

Holding international patent design, this unique heat exchanger combines the advantages of both shell & tube heat exchangers and plate heat exchangers. Incorporating leading technology in internal insulation, high heat transfer coefficients, tube strengthening and can come in single or twin circuits. Coupled with unique anti-freezing technology for long life problem-free use

• High efficiency in heat transfer from -20oC to 200oC
• Anti-freezing technology that prevents water from spilling into the refrigeration system even after freeze-ups.
• Detachable & Corrosion-resistant shell – Steel & Plastic Shell detachable for easy cleaning.
• Suitable for Swimming Pool & Salt-Water projects alike.

This product is suitable for water cooled unit, water source heat pump, air cooled pump and air cooled heat pump unit. And it is  applying for refrigerants of R22, R134a, R407C and R410A etc. The referigerating medium is for tap water, underground water, river water and sea water or brine, water and glycol solution, sulfate solution, etc. Many kinds of tubes: copper pipe, copper nickel alloy tube, titanium tube, stainless steel tube, etc. Shell raw material: PP plastic, titanium, stainless steel and others.

Plate heat exchangers offer a small yet versatile design. They also provide typically a larger coefficient of heat transfer, as they have more contact area between fluids.

They offer a small footprint that requires little to no maintenance space and is easy to maintenance, repair, and service.

Both SWEP and Alfa Laval offer a unique high-quality solution that allows Toyesi the flexibility of offering both internal heat pump heat exchange, but also external water to water solutions for energy capture and management.

These systems are often used off boiler systems for heating pools, hot water, or to capture leaving water for preheating incoming water to save running costs and increased efficiency.

Visit SonFlow

Visit SWEP

Visit Alfa Laval

Apart from our standard heat exchange, we can support a variety of quality products. These heat exchangers allow us to diversify and assist with many of the custom designs and builds we do.

• Larger Tube in Shell
• Plate – both single and double-walled.
• Assorted sizes of Titanium tubes in tubes
• Alternative mono-block or clamshell,
• Cleanable heat exchangers.
• And more.