Plunge Pool Chillers
3oC to 15oC Plunge Pools
Plunge pool Chillers
Toyesi’s range of domestic and commercial plunge pool chillers is designed for any sized swimming pool. From the smallest tub to the blow-up cold plunge pool, through to above ground, or even the largest inground pool. They are sized based on user conditions including usage, ambient conditions, ramp time, desired water temperature, and other heat load conditions.
If you already know what you are looking for you only need to select the system best suited to your needs. Or you can work with Toyesi and we can help size up your heat pump needs for you and your pool.
After sizing, based on your personal budget and needs, we can build an Australian Toyesi brand heat pump or choose from a range of Imported or well-known brands including Platypus, WaterCo, Astral, etc.
Unit Selection & Sizing Tables
All home plunge pool chillers can be affected by the pool’s location, ambient temperature, desired pool temperature, and the use of pool covers amongst many other factors. The below guides are based on 10°C pool temperature and the tabulated “Litres of Water” is an estimated pool volume guide and is there only as a suggested unit size guide. Commercial pools or pools with high personal use should always seek a sizing estimate.
Heat Pump Ranges listed:
- Platypus Mini Range – 1 kW to 3 kW
- Platypus Range – 2 kW to 12 kW
- Toyesi Commercial Range – 3 kW to 40 kW (And larger)
Platypus Chillers
Platypus Heat Pumps
The Platypus range of chillers is suitable for most home or backyard pools, cold pools, or spas. An ergonomic and attractive design, and are all heaters and chillers in a single unit. Offering the flexibility of choice in mode. Cool only, heat only, and Auto mode. Ideal for most backyard pools up to 12 kW.
The Platypus Mini range of mini heater chillers was designed with small compact backyard pools in mind. They are suitable for a wide range of pool ideas, from cold plunge pools to spas and most types of small heated pools. Also being a simple plug-and-play system, allows for portability for mobile pools, spas, and cold plunge pools.
The Platypus Mini units also can be set in heating only, cooling only, and Auto for full temperature control. Designed with all the efficiency and power of heat pumps but in a compact (approx. 40mm cube) design.
Key Features
- Compact & Economical
- High-Efficiency Eco-Friendly R32 Refrigerant
- Heating COP 4.0 to 13.8 & Cooling EER 2.7 to 5.1
- Temperature output ranges from 8 °C to 43 °C
- Ergonomically Compact Designed Chassis
- Powder Coated (mini) & ABS Plastic Casing with Anti-UV Protection (Std)
- Fantastic Value for Money!
- Will ship Australia wide - Supply only.
- Supply and install Sydney - Wollongong to Newcastle & Sydney to Blue Mountains
Do you want to know more why not give us a call at 02 9679 9400 or request a quote: Click Here
Platypus – Home Pool Heating Solutions
- The Platypus range of domestic heat pumps was developed to deliver quality at a competitive price. Ideally suited for most small to large backyard pools.
- The Platypus units come with Heat Mode, Hool Mode & Auto Mode
- The Platypus range is an Inverter heater-chiller system.
- Ideal for spas up to 38oC and backyard pools from 15°C to 31°C
- Also ideal for small 1,000 to 8,000L cold plunge pools from 8°C to 15°C
Technical Information
MODEL | COOLING KW | HP | LITERS OF WATER | POWER |
---|---|---|---|---|
HC 0704-1 | 2.68 | 1.6 | < 2,500 | 1 Phase |
HC 1005-1 | 4.02 | 2.0 | 4,000 | 1-Phase |
HC 1307-1 | 5.36 | 2.5 | 5,000 | 1-Phase |
HC 1709-1 | 5.82 | 3.0 | 6,000 | 1-Phase |
HC 2111-1 | 6.96 | 4.0 | 8,000 | 1-Phase |
HC 3015-1 | 9.52 | 5.7 | 10,000 | 1-Phase |
HC 3015-3 | 9.92 | 5.7 | 12,500 | 3-Phase |
HC 3520-1 | 12.07 | 6.0 | 15,000 | 1-Phase |
Do you want to know more or request a quote: Click Here
Platypus Mini – Mini Heat Pumps
- Home pool heating solutions are designed for small pools and have a very compact design.
- The Platypus Mini units come with Heat Mode, Cool Mode & Auto Mode
- Ideal for small spas up to 38°C and small & portable pools from 15°C to 31°C
- Also ideal for small 300 L to 2,000 L cold plunge pools from 8°C to 15°C
- For Specifications: Click Here
- For plunge pool Chillers Click Here
Technical Information
MODEL | COOLING KW | HP | LITERS OF WATER | POWER |
---|---|---|---|---|
Mini 30 | 1.5 | 0.6 | < 1,500 | 1 Phase |
Mini 50 | 2.6 | 1.0 | 2,500 | 1-Phase |
Mini 50-ie ~ Inverter & EVI | 2.0 to 3.0 | 1.0 | 3,000 | 1-Phase |
Mini 60-i ~ Inverter | 2.6 to 3.38 | 1.2 | 3,500 | 1-Phase |
The Platypus Mini Chillers can be set to + or - 1 degree. The Mini 60-i can be set to + or - 0.5 degrees.
Do you want to know more or request a quote: Click Here
Or if you want to order one online why not visit one of our resellers Click Here
Platypus Mini Plunge Pool Chillers are the smallest reverse cycle heater chillers.
Platypus Mini Plunge Pool Chillers are the smallest reverse cycle heater chillers.
Platypus Mini 30 and 50 are now available on the Toyesi Online Store
IC 9000 – Product Summary
Platypus IC 9000 All-in-One Heater Chiller
With a focused design on ice baths and cold plunge pools, but with the capability of 40-degree temperatures, the IC 9000 All-in-One chiller is suitable for small backyard pools, cold pools, or spas.
The Platypus IC900 offers unique features that include an internal water pump, ozone filter, and cartridge filter. The IC 9000 offers features that many other chillers on the market do not. Although designed with a focus on chilling, the IC 9000 also supports a reverse-cycle heating option. allowing you to heat a small spa up to 38 Degrees.
The IC 9000 chiller is well suited for a cool 8 to 15-degree plunge pool or for the keen enthusiast to take things down a notch to as low as 3 Degrees for a true ice bath experience. The IC 9000 comes coupled with our plunge pools or as a stand-alone solution supporting your home plunge pool.
Key Features
- Compact & Economical
- All-In-One Design
- Internal Water Pump
- Cartridge Filter
- Ozone Filter
- Digital Display
- R410a Refrigerant
- Temperature output ranges from 3 °C to 38 °C
- Ergonomically Compact Designed Chassis
- Fantastic Value for Money!
Do you want to know more why not give us a call at 02 9679 9400 or request a quote: Click Here
Technical Information
MODEL | Heating KW | Cooling kW | LITERS OF WATER | POWER |
---|---|---|---|---|
IC 9000 | 5.0 | 2.6 | < 2,500 | 1 Phase |
Heating kW is rated at 26 oC water temperature and 26 oC ambient. Cooling kW is rated at 26 oC water temperature and 35 oC ambient.
Do you want to know more request a quote: Click Here
Supply & Installation
- These units may be sourced from your local pool supplier
- However, they can be ordered directly from Toyesi and we will ship Australia-wide.
- For Installation, you are free to use any qualified installer. We will offer free phone support for the installation process.
- However, Toyesi can also offer Installation and Service all across Greater Sydney from Wollongong to Newcastle & Sydney to the Blue Mountains
IC 9000 the All in One solution for the home plunge experience.
IC 9000 the All in One solution for the home plunge experience.
The IC 9000 are now available on the Toyesi Online Store
Toyesi Pool & Spa Heat Pumps
Toyesi Heat Pumps
Since the Toyesi heat pump range was launched in 1989, all our units from the smallest unit to the largest units have all been built with quality construction, efficiency, and long life expectancy in mind. We now have hundreds of units right across Australia with well over 10+ years in tenure and many with well over 20 years of working life and are still in operation today.
Due to the quality of workmanship and being designed and built here in Sydney Australia, the Toyesi units are priced accordingly. However, when you consider the 10 to 20-year anticipated life span and problem-free heating or cooling experience our customers enjoy, we find that our units more than pay for themselves and offer outstanding value for money.
Also, although regarded highly in the commercial pool industry, they are suitable for most home or backyard pools, cold pools, or spas. They offer an attractive stainless steel design, small-sized footprint, and the flexibility to customise our heat pumps for almost any project outdoors or indoors right across Australia.
Easy to install and simple to maintain, you’ll find the Toyesi heat pumps a pleasure to work with. Regardless of the site’s landscaping or site design. Toyesi has over 40 different standard model capacities from 4 kW – 440 kW in both outdoor and in-plant models; with either end, side, or vertical fan discharge configurations available, and either a choice of our patented high-efficiency pool grade copper-nickel heat exchange technology through to high-end grade titanium heat exchangers.
- Will ship Australia-wide - Supply only.
- Supply and install Sydney - Wollongong to Newcastle & Sydney to Blue Mountains
Do you want to know more why not give us a call at 02 9679 9400 or request a quote: Click Here
Toyesi – Australian-Built High-End Domestic & Commercial Heat Pumps
- The Toyesi commercial units come with options for Heat Mode Only (SSD), or Cool Mode, Heat Mode & Auto Mode (HCC)
- Ideal for spas up to 38°C and swimming pools from 15°C to 31°C
- Suits almost any size backyard swimming pool
- Multi-stage units available up to 250kW cooling and 440 kW Heating
- Also ideal for small 1,000 L through to large 20,000 L plus cold plunge pools from 8°C to 15°C
- Options are available for super cold pools below 8oC & custom designs for unique projects
- Widest 1-Phase and 3-Phase options.
- Long Life Expectation up to 20 years plus if well maintained.
Product Features
- Distinctive, robust, and corrosion-resistant stainless-steel case and fasteners throughout.
- Low ambient ‘winter heating capacity ratings
- Compact slim case design offering a small footprint.
- Commercial-grade compressor technology
- High heat transfer coefficient pool-spa water heat-exchangers for use with salt or chlorinated water
- Self-managing ‘reverse cycle’ defrost logic.
- Optimum flow rate water balancing valves
- Visible operating performance needle gauges.
- Self-diagnostic energy management control board.
- Slow rotation ‘quieter’ side fan operation.
- Digital LED display thermostat controller
- Compressor ‘soft start’ control.
- Factory operation and performance testing.
- Long-term after-sales technical support and service
- Warehouse stocked spare parts ‘ready to ship’.
- Fully welded condensate recovery drip tray.
Technical Information
MODEL | HEATING KW | Cooling kW HP | HP | POWER |
---|---|---|---|---|
TET 175 SSD | 6 | 4 | 1.8 | 1 Phase |
TET 250 SSD | 11 | 7 | 2.5 | 1-Phase |
TET 300 SSD | 14 | 9 | 3.0 | 1 or 3 Phase |
TET 400 SSD | 18 | 12 | 4.0 | 1 or 3 Phase |
TET 500 SSD | 20 | 14 | 5.0 | 1 or 3 Phase |
TET 600 SSD | 26 | 18 | 6.0 | 1 or 3 Phase |
TET 800 SSD | 38 | 26 | 8.0 | 3 Phase |
TET 1000 SSD | 48 | 33 | 10.0 | 3 Phase |
TET 1200 SSD | 58 | 40 | 12.0 | 3 Phase |
TET 1500 SSD | 68 | 45 | 15.0 | 3 Phase |
Heating and Cooling kW values are at Nominal conditions and should be used as a guide only.
Do you want to know more request a quote: Click Here
Toyesi Commercial Pool Chillers are built for long touble free lifespan..
Toyesi Commercial Pool Chillers are built for long touble free lifespan..
Looking for something else?
Plunge Pool Chillers or Spa Heat Pumps
Coldwater plunge pools for most of us are a scary thing. In fact, going in water lower than 20 degrees Celsius is a cold usually only the avid ocean surfer or swimmer goes through. Yet over the last decade or so the health benefits of cold water bathing have now become the go-to solution for many athletes, health gurus, and rehabilitation experts. However much can also be said about the benefits of a warm heated spa up at 38 degrees. Easing away muscle aches, relaxing or just hanging out for fun.
This is why our Platypus range of heat pumps and chillers are all heater chillers. Allowing you a unique flexibility to swap between spa and plunge.
However, to prevent thermal shock inside the heat pumps, please allow time between modes for the heat pump to stabalise & climatise to ambient conditions. This can be done by putting the heat pump in standby mode or turning it off.
Swapping from 8 degrees to 38 or from 38 back to 8 degrees will take time, and depending on the size of the unit and the size of the pool, this could be hours or even a day or two. For example for a 1,000L tub to go from 8 degrees to 38 degrees will take a 5kW heater at least 8 hours.
Are you Ready to take the Plunge?
Australia’s most reliable manufacturer of technically advanced commercial quality
HEATER-CHILLER HEAT PUMPS…
Unmatched For Technical Expertise & Meticulous Manufacturing
HEATER-CHILLER HEAT PUMPS…
Unmatched For Technical Expertise & Meticulous Manufacturing
Get a Quote*
Fill out the following form, our expert team will contact and make sure you
get the highest level of assistance